Comparison
How WolfWyse compares with simulation and scheduling software
WolfWyse is an investment modelling platform and a modelling service for batch and process manufacturers. It is often compared with simulation software such as Witness, Simul8 and FlexSim, and with scheduling software such as DecisionBrain. They answer different questions. This page shows which one fits which decision.
- Your model built free of charge
- Runs in the browser, nothing to install
Your question
The tool for it
First estimate
Spreadsheet
Behaviour over time
Simulation software
Daily schedule
Scheduling software
Investment case
WolfWyse
The options
The tools manufacturers compare us with
There are more factory modelling and planning products than anyone could shortlist. Nearly all of them fall into one of four groups, and each group is built to answer a different question.
Spreadsheets
Where most capacity studies start. Quick to build, and everyone on the team can open one.
Simulation software
General-purpose tools that play a process through time. A trained modeller can model almost anything, from an assembly line to a warehouse.
Scheduling software
Advanced planning and scheduling (APS) systems that turn orders into a working schedule for every line, usually fed by your ERP.
WolfWyse
An investment modelling platform and a modelling service for batch and process plants. We build the model, and it shows which change gives the best payback.
Side by side
How the four compare
| SpreadsheetsExcel, Google Sheets | Simulation softwareWitness, Simul8, FlexSim | Scheduling softwareDecisionBrain, Opcenter APS | WolfWyseInvestment modelling | |
|---|---|---|---|---|
| The question it answers | Roughly how much can we make? | How will this process behave over time? | What do we run, where and when? | Which change or investment pays back best? |
| Who builds the model | You | Your trained modeller, or consultants as a separate project | The vendor or an integrator, with your planners | We do, free of charge |
| What you need to start | Someone with the time to build it | A licence and a trained modeller | A licence and an implementation project | Your data. We send a sheet that lists what we need |
| Batch sizes, tanks, WIP and cleaning | Hard to capture. Averages hide them | Built by the modeller for each model | Configured during setup | Built in |
| Production plan | Manual | Not the main purpose. Some products add scheduling | Yes. The day-to-day schedule for every order | Yes, wherever output or cost can be improved. It does not replace your scheduling system |
| Labour, energy and cost per unit | Whatever you build in | If the modeller builds them in | Varies by product | Calculated for every option |
| Link to ERP or machines | No | Optional, as extra project work | Yes, normally fed by ERP orders and stock | No. It works from the data you send us |
| 3D animation | No | Yes, in most products | Rarely | No. A 2D flow model, plans and charts |
| How you pay | You already own it | A licence, plus training and any consultancy | A licence or subscription, plus implementation | The model is free. You pay when you want answers |
The columns describe each group in general. Individual products differ, so check the vendor’s own site before you decide.
Which one fits
Pick the tool by the decision in front of you
Each of these is the right choice for some jobs. Here is where we would point you to another tool, and where WolfWyse fits.
A spreadsheet is enough when
- The line is simple, with no shared tanks or WIP between lines.
- You only need a rough figure to decide whether to look further.
Simulation software is the better choice when
- The process is outside batch and process manufacturing: warehousing, logistics, discrete assembly or healthcare.
- You need a 3D layout or animation to show stakeholders.
- You have a simulation engineer who wants to write custom logic for unusual equipment.
Scheduling software is the better choice when
- You need tomorrow’s schedule for every order, taken straight from ERP data.
- Your planners will use it every day to issue the plan to the shop floor.
Where we fit
WolfWyse is the better choice when
- Tanks, WIP, cleaning cycles and changeovers decide how much your plant can really make.
- A capital decision is coming and you have no modeller in-house, or no time to train one.
- You want the investment case and a workable production plan from one model, so engineering, planning and finance use the same figures.
- You want engineers to find the answer for you, with the option to carry on in the model yourself.
- You want to see a model of your own plant before you pay anything.
Getting started
How you start with WolfWyse
With the other tools you buy the software first and build the model afterwards. With WolfWyse the model comes first.
We build your model
Send us your data and we build a model of your plant, free of charge. We send a data request sheet that lists what we need for each machine.
You pay when you want answers
Our engineers run the analysis and bring you the result. Your team gets user accounts for the model at the same time.
You keep working in the model
Your team can test further changes in the browser. If you want our engineers to do more analysis later, that is charged separately.
FAQ
Frequently asked questions
Is WolfWyse simulation software?
No. Simulation software plays a process through time so that a trained modeller can study how it behaves. WolfWyse models what your plant can make within its real limits and works out which change or investment gives the best payback. Our engineers build the model for you.
Is WolfWyse a scheduling or APS system?
No. We can model your whole factory, and we produce production plans for the areas where output or cost can be improved, so that each investment is tested against a plan that could really run. It has no link to your ERP and does not replace the system your planners use to issue the daily schedule.
Is WolfWyse a digital twin?
No. We don’t connect to your machines or control systems. We build a model of your plant from your data and use it to plan and test changes before you invest.
We already use simulation or scheduling software. Is WolfWyse still useful?
It can be. Keep the tool you have for the job it does. WolfWyse is worth a look when a capital decision is coming and the tool you have would need batch, tank and cleaning limits modelled by hand before it could answer.
Can our own team change the model?
Yes. We build the model so you see results quickly. After that your engineers can change it in the browser: add equipment, change rates and tank sizes, or set up a new product route.
What does it cost to find out whether it would help?
Nothing. We build the model free of charge. You pay when you want answers from it: our engineers run the analysis, and your team gets user accounts to keep working in the model. Further analysis by our engineers later is charged separately.
What do you need from us to build the model?
Your data. We send a data request sheet that lists what we need for each machine.
Do we need to install anything?
No. WolfWyse runs in the browser on our cloud platform, hosted on AWS. Access is controlled by user roles.
Most of our work is in food and drink. Read how our team builds your model, how we model food and beverage plants, or go straight to the case studies.
Product names belong to their owners and are listed as examples of each group. Checked in November 2026.